Step 1 from 9
Choose between PS-Linear Actuators or PS-Quarter-Turn Actuators.
Step 2 from 9
Choose the type of control between open-stop-close or Modulating.
Step 3 from 9
Drag the controller to the desired position or enter the Thrust that you want your actuator to provide. You have the choice from 0.1 to 30 kN.
Drag the controller to the desired position or enter the torque you want your actuator to provide. You have the choice from 25 to 3000 Nm.
Step 4 from 9
Select the appropriate voltage for your actuator.
Step 5 from 9
If so, choose between ATEX and IECEx.
Step 6 from 9
This option, also known as failsafe, enables the actuator to move to a fail-safe position in the event of a power failure.
Step 7 from 9
The control unit is equipped with a display and enables direct operation and parameterisation on the PS-AMS actuator at the push of a button.
Step 8 from 9
If so, you can choose from CanOpen, Modbus RTU, Profibus DP or Profinet.
Step 9 from 9